T | 5.7mm | W | 33.3mm | H | 39mm |
L1 | 65±3mm | WIRE | 1571#30AWG | PCM |
Item |
Specifications |
|||
Nominal capacity |
700mAh @ 0.2C Discharge |
|||
Initial Impedance |
Pack ≤160mΩ |
|||
Weight |
Approx:13g |
|||
Nominal voltage |
3.7V |
|||
Fully charge voltage (FC)
|
4.2V Defined in this DOC: FC = 4.2V
|
|||
Fully discharge voltage |
2.4V Defined in this DOC: FD = 2.4V |
|||
Charge current
|
0.2C=140mA |
Standard Charging |
||
1.0C=700mA |
Rapid charge |
|||
Standard charging method
|
0.2C CC ( constant current ) charge to FC, then CV(constant voltage FC)charge till charge current decline to ≤0.01C
|
|||
Charging time |
6.0 hours(Ref.)
|
Standard Charging |
||
1.5 ~2.5hours(Ref.) |
Rapid charge |
|||
Max. charge current
|
Constant Current 1.0C Constant Voltage FC 0.01 C cut-off
|
|||
Max. discharge current
|
Constant current 1.0C end voltage FD
|
|||
Standard Discharge Current
|
Constant current 0.2 C end voltage FD
|
|||
Charge cut-off voltage
|
Ref. 7.1 VDET1 |
|||
Discharge cut-off Voltage
|
Ref. 7.1 VDET2 |
|||
Operating temperature
|
0℃~45℃ |
Charging |
||
-20℃~60℃ |
Discharging |
|||
Storage temperature
|
-10℃~ +45℃ |
less than 1 month
|
Recommended storage temperature: 25℃,at the shipment state |
|
-10℃~ +35℃ |
less than 6 months
|
|||
Recoverable capacity |
Constant current 0.2C charge to FC, then constant voltage FC charge to current declines to 0.01C, rest for 10min,constant current 0.2C discharge to FD,rest for 10min.Repeat above steps 3 times, recording the maximum capacity
|
|||
Storage Humidity
|
≤75% RH |
|||
Appearance
|
Without distortion and leakage
|
|||
Standard testing condition
|
Temperature : 23±5℃ Humidity : ≤75%RH Atmospheric Pressure : 86-106 Kpa |
|||
Remark: From 4.1 to 4.12, the testing condition is following 4.17 (standard testing condition)